The HD 10 DA is a cost effective and high compact High Definition DAC, converting serial digital HDTV to high definition component analog video ( Y/ P / P and R G B/H V ). B R The HD 10 DA provides automatic input scan rate detection.
Output is provided for studio requirements in analog components with Tri-Level Sync on Y ( 3x BNC)
In addition, a second output is available for monitoring, supporting a standard 15 pin computer monitor interface (15 pol Sub-D).
A build-in test generator provides 8 different test-patterns to facilitate output alignment. The test generator is locked to input timing when available.
In free-run mode the HD 10 DA can be used as an analog test generator, switchable to the supported standards.

  • HD SDI input with active loop-through
  • Simultaneous component and RGB output
  • Computer monitor interface RGB/HV
  • Supports 720p, 1035i, 1080i formats
  • 24/25/30 p(sF) formats
  • 50/60 i formats
  • Build-in test generator for color-bar, Y-ramp, Rainbow
  • 30 Mhz Y- sweep,15 Mhz C-sweep
  • pos. and neg. grid, Monitor Test
  • Compact size: 108x80x25 mm

HD-SDI: SMPTE 292M, 1.485, 1.485/1.001 Gb/s 8 / 10 Bit with equalized active loop-through
Cable length: up to 100m (Belden 1694A)
Return loss: > 15 dB up to 1.485 GHz
Power: 5 V, 5 W regulated


Analog Y with tri-level sync, Pb, Pr resolution 30 /15 Mhz +/- 0,2dB
Analog R,G,B, H sync, V sync 15p Sub-D
Return loss > 15 dB


720p/60/59,94/50 SMPTE 296M
1035i/60/59,94/50 SMPTE 240M
1080i/60/59,94/50 SMPTE 274M
1080p/25/24/23,98 (sF)
1080p/30/29,97 (sF)
1250/50i (1980×1152)

Kit Rental